Question
How does the number of wire coils affect the strength of an electromagnet?
Sample hypothesis
If the number of coils increases, then the electromagnet will pick up more paper clips, because each loop adds to the magnetic field.
Write your own version after your research. See how to write a hypothesis.
The science behind it
Electric current flowing through wire creates a magnetic field. Coiling the wire stacks those fields together, and an iron core concentrates them. Field strength is roughly proportional to the number of turns times the current.
Materials
- Large steel nail (about 10 cm)
- Insulated copper wire (22-gauge magnet wire or hookup wire), about 3 m
- 1 D-cell battery and holder
- Small steel paper clips
- Sandpaper (to strip wire ends)
- Switch or alligator clips
Procedure
- Strip about 2 cm of insulation from each wire end.
- Wrap 10 tight coils around the nail, all in the same direction.
- Connect to the battery for no more than 10 seconds at a time.
- Touch the nail tip to a pile of paper clips, lift, and count how many hang on.
- Disconnect, and let the battery and wire rest for 30 seconds.
- Repeat 3 trials, then rewrap with 20, 30, 40, and 50 coils using the same total wire length (leave extra wire uncoiled).
Variables
| Independent (you change) | Number of coils |
|---|---|
| Dependent (you measure) | Number of paper clips lifted |
| Controlled (keep the same) | Same nail, battery, and wire length; Same paper clip size; Same contact time |
Data and graph
Table and scatter plot of clips vs. coils. Draw a best-fit line and describe the trend. See data tables and graphs.
Safety
- Use a single 1.5 V battery only; never wall outlets
- Disconnect between trials; wire and battery can get hot
- Never short a lithium or rechargeable battery
General rules: science fair safety.
Take it further
Keep coils constant and test 1 vs. 2 batteries in series, or compare a steel nail with an aluminum rod as the core.