Question
Do rubber bands obey Hooke's law the way metal springs do, and what happens when you unload them?
Sample hypothesis
If increasing masses are hung from a spring, its stretch will increase linearly, but a rubber band's stretch will curve and will not retrace the same path when unloaded.
Write your own version after your research. See how to write a hypothesis.
The science behind it
Hooke's law says force is proportional to stretch, F = kx, for an ideal spring. Rubber is made of tangled polymer chains, so its force-stretch curve is nonlinear, and it loses some energy as heat on each cycle. That loss is called hysteresis.
Materials
- A metal spring and 3 identical rubber bands
- Slotted masses or bags of coins weighed on a kitchen scale
- Ring stand or a hook
- Meter stick
- Phone camera (optional, to read positions precisely)
Procedure
- Hang the spring and record its unstretched length.
- Add mass in equal steps (for example 50 g) up to a safe maximum, recording length each time.
- Then remove mass in the same steps and record lengths again.
- Repeat with each rubber band.
- Convert mass to force (F = mg) and stretch to meters.
Variables
| Independent (you change) | Applied force (N) |
|---|---|
| Dependent (you measure) | Extension (m) |
| Controlled (keep the same) | Same loading increments; Wait 10 seconds before each reading; Same temperature |
Data and graph
Force vs. extension graphs for loading and unloading. Find k from the slope of the spring's line. Shade the area between the rubber band's loading and unloading curves; that area is energy lost per cycle. See data tables and graphs.
Safety
- Wear safety glasses in case a band snaps
- Keep feet clear of hanging masses
General rules: science fair safety.
Take it further
Warm a rubber band with a hair dryer and repeat. Rubber does something unusual: it gets stiffer when heated.