Question
Which bridge design holds the most weight for its own weight?
Sample hypothesis
If the bridge uses triangles (a truss), then it will hold more weight per gram, because triangles do not change shape under load.
Write your own version after your research. See how to write a hypothesis.
The science behind it
Triangles are rigid: you cannot change their shape without changing a side's length. Truss bridges such as the Warren and Pratt designs use triangles to spread loads into the members as pulling and pushing forces.
Materials
- Craft sticks (same brand)
- Wood glue
- Kitchen scale
- Bucket and sand or water for loading
- String or S-hook
- Two tables or chairs as supports
Procedure
- Choose 3 designs: simple beam, Warren truss, Pratt truss. Each must span the same gap (for example 30 cm) and use about the same number of sticks.
- Build each and let the glue dry 24 hours.
- Weigh each bridge.
- Hang the bucket from the center and add sand slowly until the bridge fails.
- Weigh the bucket and sand.
- Calculate efficiency = load held ÷ bridge mass.
Variables
| Independent (you change) | Bridge design |
|---|---|
| Dependent (you measure) | Maximum load (g) and efficiency (load ÷ bridge mass) |
| Controlled (keep the same) | Same span; Same materials and glue; Same loading point and rate |
Data and graph
Table and bar chart of efficiency; photos of where each bridge broke. See data tables and graphs.
Safety
- Wear safety glasses when loading to failure
- Keep feet out from under the bucket
General rules: science fair safety.
Take it further
Build two copies of your best design and improve the weak spot you saw break. That redesign step is what judges look for in engineering projects.