Question
How do the number of blades and their pitch angle affect a small wind turbine's power output?
Sample hypothesis
If the turbine has 3 blades at a moderate pitch, then it will produce the most power, because it balances catching the wind with low drag.
Write your own version after your research. See how to write a hypothesis.
The science behind it
Turbine blades work like wings: lift turns the rotor. More blades catch more wind at low speed but add drag and weight. Most utility turbines use three blades as a balance between efficiency, cost, and smooth spinning.
Materials
- Small DC hobby motor used as a generator
- Cardboard or balsa for blades, a cork or bottle cap hub
- Box fan
- Multimeter and a load resistor
- Protractor
- Tape measure
Procedure
- Build a hub that lets you swap blades and set their pitch angle.
- Place the fan a fixed distance away (for example 1 m) on a set speed.
- Test 2, 3, 4, and 6 blades at one pitch; measure voltage across the resistor and calculate power (V²/R).
- Choose the best blade count and test pitch angles from 10° to 50°.
- Do 3 trials of 30 seconds each, recording the steady reading.
Variables
| Independent (you change) | Blade count, then pitch angle |
|---|---|
| Dependent (you measure) | Power output (mW) |
| Controlled (keep the same) | Same fan speed and distance; Same blade size and material; Same generator and load |
Data and graph
Two graphs: power vs. blade count and power vs. pitch angle. Identify the optimum design. See data tables and graphs.
Safety
- Keep fingers away from spinning blades
- Wear safety glasses in case a blade flies off
General rules: science fair safety.
Take it further
Measure wind speed with an inexpensive anemometer and estimate your turbine's efficiency compared with the Betz limit (59.3%).